RS Series Relay Modules

At only 6.2mm thickness the RS series Relay module features a slim Din Rail mountable interface solution. The modules have a plug in construction and are available with or without the relay. The built in LED indicates the relay energizing state. The relay features a SPDT configuration and a maximum switching current of 6A. It is available with several standard coil voltages from 5VAC/DC up to 230V AC/DC.

There is a provision for fitting pluggable jumpers which reduces the wiring time. The modules have screw terminals with finger protection for wire termination and offer an IP 20 protection rating. The relay has an IP67 protection rating. Both the relay and the module are UL recognized.

General Purpose / Interface Relays

AC or DC coil I-Series direct DIN-Rail mountable with screw terminals for PLC applications M, G, L plug-in relays for DIN-Panel mountable sockets, with lockable test buttons and mechanical flag (M and G) LED version available Diode module for M-Series and G-Series available

RS Series Socket

Characterisitics

Ambient Temperature: Rated Voltage: Rated Current: Insulation Voltage (Min.): Protection: Socket Material: Contacts Spring Material: Terminal Torque: Wire Strip Length: Applicable Relay Type:

-40°C to +70°C, (-40°F to +158°F) 250VAC 6A (per pole) 5000VAC IP20 PA66+GF V0 (UL) QSn6.5-0.1 0.6Nm (5.3 lb. in.) 7mm RSR Series (41F)

RS Series Subminiature Power Relay

• Slim size (width 5mm)
• High breakdown voltage 4kV (between coil and contacts)
• Surge voltage up to 6kV (between coil and contacts)
• Clearance/creepage distance: 8mm
• Coil power consumption: 170mW
• Contact configuration: SPDT (Form C)
• Environmental friendly product (RoHS compliant)
• Outlne Dimensions: 28.0 x 5.0 x 15.0mm